热/均布载荷下双材料悬臂梁的解析解

基于弹性介质的二维本构关系和热传导理论，采用逆解法，研究了双材料悬臂梁在热／机械载荷作用下的问题，通过假设双材料悬臂梁构件的应力函数，利用应力、位移边界条件和连续性条件，给出了其位移、应力分布的表达式。     

剪切载荷下肋板的屈曲分析与优化

利用ANSYS有限元方法分析了一系列的肋板，研究了加强肋的作用，提出了 优化肋设计的限制条件. 结果表明，由横向肋板产生的栅格数目不能小于肋板的长宽比. 换 句话说，横向加强肋必须把平板的长度划分为小于等于宽度的段. 结果还显示，加强肋的优 化几何特性与板的屈曲从整体模态到局部模态转变点相应. 而且，所有具有相似长宽比和肋 数的肋板，具有一个特定的比值$EI_{s}/aD$, 此时抗剪应力最佳.     

坡面流及土壤侵蚀动力学（II）——————土壤侵蚀

介绍了坡面土壤侵蚀的基本特征和主要类型, 综述了坡面土壤侵蚀动力学过程和预报模型等方面的研究进展, 包括土壤表层结皮、雨滴溅蚀、片流侵蚀、细沟侵蚀、坡面流输沙、土壤侵蚀界限坡度, 以及土壤侵蚀预报模型等. 并简要讨论了土壤侵蚀动力学研究的发展趋势.     

波纹钢屋盖结构板件相关屈曲的试验研究与分析

拱型波纹钢屋盖结构的受力机理异常复杂，波纹、加工制作过程中产生的变形和残余应力等初始缺陷在理论分析中很难精确定量描述。论文对波纹钢屋盖结构梯形截面板组进行了轴心和偏心压力作用下稳定承载能力的试验研究，并与理论结果进行了比较分析，试验与理论结果吻合较好。试验结果表明波纹板组具有较高的局部屈曲承载能力，但几乎无屈曲后承栽能力，与平板板组屈曲特性相比有显著差异。     

开槽对大跨悬挑平屋盖结构风荷载的影响

本文结合一大跨悬挑平屋盖模型的风洞试验研究，分析了此类结构屋盖的平均局部体型系数和极值局部体型系数的分布特性；并根据其风压的分布特性，提出在悬挑屋盖承受较大负压的屋檐和角点附近这些遇强风易发生破坏的部位采取开槽气动抗风措施，进一步研究了该气动抗风措施对大跨悬挑平屋盖结构风荷载的影响，试验结果显示，它们可以有效地削减屋盖风敏感处的风荷载值，使平均局部体型系数大约降低50％，极值局部体型系数大约降低25％，所得的这些结果对于结构的抗风设计有一定的指导意义。     

Thermal buckling and post-buckling of pinned–fixed Euler–Bernoulli beams on an elastic foundation

In this article, both thermal buckling and post-buckling of pinned–fixed beams resting on an elastic foundation are investigated. Based on the accurate geometrically non-linear theory for Euler–Bernoulli beams, considering both linear and non-linear elastic foundation effects, governing equations for large static deformations of the beam subjected to uniform temperature rise are derived. Due to the large deformation of the beam, the constraint forces of elastic foundation in both longitudinal and transverse directions are taken into account. The boundary value problem for the non-linear ordinary differential equations is solved effectively by using the shooting method. Characteristic curves of critical buckling temperature versus elastic foundation stiffness parameter corresponding to the first, the second, and the third buckling mode shapes are plotted. From the numerical results it can be found that the buckling load-elastic foundation stiffness curves have no intersection when the value of linear foundation stiffness parameter is less than 3000, which is different from the behaviors of symmetrically supported (pinned–pinned and fixed–fixed) beams. As we expect that the non-linear foundation stiffness parameter has no sharp influence on the critical buckling temperature and it has a slight effect on the post-buckling temperature compared with the linear one.     

硅微陀螺梳齿驱动的面内失准分析

静电梳齿微驱动器因其结构简单、功耗低、灵敏度高、受温度影响小，成为硅微陀螺仪的主要驱动方式。静电梳齿微驱动器通常由活动梳齿和固定梳齿组成。理想情况下，活动梳齿平行地位于两固定梳齿中心位置。但由于加工误差、驱动结构不对称、扰动等因素，使得活动梳齿相对固定梳齿发生偏转。该文应用能量法及虚功原理，建立了梳齿之间的力与力矩平衡方程。得出了非理想情况下，偏离距离和转角的解析表达式，并分析得出了梳齿间的临界电压。经过数值仿真发现，梳齿面内既偏转又转动时的临界电压小于只发生偏转或转动时的临界电压。     

Variation of the stress intensity factor along the front of a 3-D rectangular crack subjected to mixed-mode load

Summary  The singular integral equation method is applied to the calculation of the stress intensity factor at the front of a rectangular crack subjected to mixed-mode load. The stress field induced by a body force doublet is used as a fundamental solution. The problem is formulated as a system of integral equations with r ⁻³-singularities. In solving the integral equations, unknown functions of body-force densities are approximated by the product of polynomial and fundamental densities. The fundamental densities are chosen to express two-dimensional cracks in an infinite body for the limiting cases of the aspect ratio of the rectangle. The present method yields rapidly converging numerical results and satisfies boundary conditions all over the crack boundary. A smooth distribution of the stress intensity factor along the crack front is presented for various crack shapes and different Poisson's ratio. Received 5 March 2002; accepted for publication 2 July 2002     

结构静动力屈曲问题研究进展

近几十年来，结构的静动力屈曲问题一直是力学工作者极为关注的一个前沿课题．本文总结和综述了这一研究领域的几个基本问题：屈曲问题的分类、动态屈曲问题的特点及其特征量；介绍了屈曲问题的处理方法和目前已取得的成果；总结评述了人们关心的热点问题；屈曲问题的模型分析和实验技术、动态屈曲判别准则．     

拉压性能不同材料的几种结构的极限分析

给出了拉压性能不同材料（简称具有Ｓ－Ｄ效应的材料）的几种结构的极限载荷公式。揭示出材料的拉压性能不同对几种结构承载能力的影响规律。所给出的极限载荷公式可供工程设计人员参考。